LME620-AI / PME120-AI / EAN823 / EBN853 / EBN861 ELECTRONIC UNIT | OI/PME/LME/EAN823/EBN853/EBN861-EN REV. E 9
EBN861
IP rating IP 66
Humidity ≤ 95% annual average; condensation not permitted
Ambient temperature -25 to 55 °C (-13 to 131 °F)
Transport and storage temperature -25 to 70 °C (-13 to 158 °F)
Long-term storage temperature -25 to 40 °C (-13 to 104 °F)
Mounting position On vertical mounting plate, cable gland at the bottom
Vibration stress Maximum 150 Hz: acceleration: 1 g (in accordance with EN 60068-2-6, Table C.2)
Paint 2-layer component epoxy (RAL 9005, black)
Electrical connection Mains supply via screw terminals; all other connections made via screw-type plug connectors
Connection cable between electronic unit and actuator tightly fastened to the electronic unit, from the
actuator side using a connector to the connection to the actuator. Maximum cable length 100 m (328 ft).
In actuators in explosion-proof design, the connection cable is tightly fastened to the actuator without a
connector through the screw terminals.
Optional, loose cable set supplied acc. to length requirements
Weight 40 kg (88 lbs)
Change from one to tw o columns
To Next Page
Loading...
