To Next PageTo Next Page
Need help?Do you have a question about the ABB Eurofire EN54 and is the answer not in the manual?
General| Brand | ABB |
|---|---|
| Model | Eurofire EN54 |
| Category | Control Panel |
| Language | English |
Details of indicator lights on the Eurofire control panel.
Explanation of the panel's control buttons and their functions.
Lists and describes available functions within the User menu.
Displays the version and date of the controlling software.
Function to set the panel's time and date.
Disables alarm circuits, auxiliary relays, or zone powered sounders for maintenance.
Disables individual zones to prevent fire/fault detection during work.
Momentarily sounds zone powered sounders for testing.
Covers Bell Test, Lamp Test, and Walk Test functions for system verification.
Accesses event history, overrides delays, and initiates evacuation procedures.
Describes the display and status during normal operation.
Details panel behavior and display during a fire activation.
Lists and explains various faults detected and displayed by the Eurofire system.
Guidance on routine testing of fire detection and alarm systems.
Recommendations for inspection and servicing by competent organisations.
Details annual inspection and testing requirements for the system.
Guidance on investigating and mitigating false alarms.
Overview of the manual's purpose for installation and commissioning.
Key considerations for designing the Eurofire system installation.
Step-by-step instructions for installing the Eurofire control panel.
Lists and describes the panel's indicators (LEDs and LCD).
Lists and describes the panel's control buttons.
Summarizes the key features and capabilities of the Eurofire system.
Identifies the location of the engineering mode switch on the PCB.
Lists and describes the functions accessible via the Engineer menu.
Tests fire detectors and call points across all zones of the system.
Tests the panel's auxiliary contacts.
Allows creation and modification of device operation patterns.
Details how to view and edit specific pattern parameters.
Explains how to edit pattern parameters like NetAdd, Delay, Pulse, On/Off times.
Illustrates setting up a pattern for activation on another panel.
Lists the default pattern configurations for Conventional and Alarm Sense modes.
Assigns created patterns to specific zones for activation.
Assigns a pattern to the Class Change event.
Allows testing of patterns without a fire condition.
Configures zone settings like Conventional/2-Wire and Latching/Unlatching.
Explains how to configure zones using jumpers and software settings.
Allows entering a 20-character text description for each zone.
Allows editing of the system's general 'system healthy' message.
Configures networking between Eurofire panels and repeaters.
Details the wiring for a Star network configuration.
Details the wiring for an Isolated Star network configuration.
Steps to set up a Star network, including wiring and termination.
Steps to set up an Isolated Star network, including wiring and termination.
Allows setting the network communication speed for all panels.
Allows setting the unique network address for the panel.
Steps to configure the network speed for panel-to-panel communication.
Steps to configure panel addresses, network mode, and default patterns.
Connects panels and repeaters on the network, showing their status.
Sends text and ringing patterns from a PC to the Eurofire EN54 panel.
Sends text and ringing patterns from the Eurofire EN54 panel to a PC.
Clears all recorded events from the panel's event log.
Restores the panel to its factory default settings.
Allows changing the user access code for the panel.
