Need help?Do you have a question about the ABB ACS-AP-x and is the answer not in the manual?
General| Brand | ABB |
|---|---|
| Model | ACS-AP-x |
| Category | Control Panel |
| Language | English |
Steps to attach and detach the control panel from the drive.
Procedure for initial panel setup and language selection.
Identification of physical components and display elements.
Description of the control panel's physical keys and their operations.
How to use the start and stop keys in local control.
Function of the Loc/Rem key for switching control modes.
Table of useful key combinations for specific functions.
Meaning of the control panel's status LED indications.
Purpose and function of the USB connector.
How to connect multiple drives via panel bus.
Accessing the menu to view and select connected drives.
Process of selecting a drive for control.
How faults and warnings appear for selected and other drives.
Display of faults/warnings for the active drive.
Display of faults/warnings from non-selected drives as remote faults.
How to identify problems using display, LED, and icons.
Procedures for identifying, resetting, and solving faults.
Procedures for identifying and managing warnings.
Main functions of connecting the panel to a PC via USB.
Step-by-step guide to connect the panel to a PC.
Using the panel to connect PC tools to the drive.
Behavior when connecting in local control mode.
Behavior when connecting in remote control mode.
How to copy screenshots and backups between panel and PC.
Specifications of the control panel's LCD display.
To Next Page
