Operation Manual / TPS44-F.. - TPS61-F..
Safety 2
Safe operation and maintenance 2.6 Page 24
© Copyright 2016 ABB. All rights reserved.
August 2017HZTL2412_ENRevision F
τ Wear personal protective equipment (PPE) according to the material
safety data sheet.
τ Inspect the electric cables for abrasion and damage before and after
your cleaning work.
Safety during disassembly, assembly, maintenance and troubleshooting
τ Always perform the specified adjustments, servicing as well as inspec-
tion work and observe inspection intervals.
τ Inform operating personnel about all service and repair work before
beginning.
τ Before opening a cover or removing a protective device on a turbo-
charger, the engine must be switched off and the turbocharger must
have come to a standstill.
τ Ensure that the supply of oil is interrupted, especially with an external
oil supply.
τ Put the engine into operation only after all parts have been refitted
properly.
CAUTION
Mechanical work on the turbocharger
Possible damage to or destruction of components on the turbocharger.
τ Perform only those tasks that are described in this manual.
τ Perform work only for which training has been carried out.
Safety when taking out of operation or preparing for mothballing
τ Secure the rotor so it cannot turn. The rotor can turn on its own from
the force of the stack draught.
τ Clean the turbocharger before mothballing it.
τ Observe the material safety data sheet for the cleaning and mothball-
ing agents.
τ Wear personal protective equipment (PPE) according to the material
safety data sheet.
To Next Page
Loading...
Need help?
General
