Operation Manual / TPL67-C.. - TPL71-C..
3 Commissioning / 3.1 Oil supply
© Copyright 2020 . All rights reserved. HZTL2488_EN Rev.G March 2020
3 Commissioning
3.1 Oil supply
A carefully designed and installed oil supply, which functions in all pos-
sible operational conditions, is an important prerequisite for trouble-
free turbocharger operation.
The turbocharger is normally lubricated with oil from the engine oil cir-
cuit.
NOTICE
With regard to the oil supply, please observe the engine builder's spe-
cifications for lubricating oil selection, oil change intervals, oil filtration,
oil pressure and oil temperature.
Oil filtration
Filtration of the lubricating oil using a filter mesh size ≤ 0.034 mm is ad-
equate for TPL67-C turbochargers and a mesh size ≤0.050 mm for
TPL71-C turbochargers.
NOTICE
This filtration can also be carried out using an additional self-cleaning
fine filter.
Page 28 / 125
To Next Page
Loading...