B
Brian EricksonSep 9, 2025
Why does my ABB Industrial Equipment have vibrations?
- Aaaron12Sep 9, 2025
Vibrations in your ABB Industrial Equipment may be due to rotor unbalance. In this case, you should contact an ABB Turbocharging Service Station.
To Next PageTo Next PageWhy does my ABB Industrial Equipment have vibrations?
Vibrations in your ABB Industrial Equipment may be due to rotor unbalance. In this case, you should contact an ABB Turbocharging Service Station.
What to do if rotating parts in ABB Industrial Equipment are rubbing?
If you notice rubbing of rotating parts in your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
What to do if my ABB HT845057 has a sluggish start-up?
A sluggish start-up in your ABB Industrial Equipment can occur if the turbocharger is contaminated, in which case you should clean it. It can also happen if there is a damaged bearing, in which case you should contact an ABB Turbocharging Service Station.
What causes measured speeds to be too high in ABB Industrial Equipment?
If measured speeds are too high in ABB Industrial Equipment, it could be due to a contaminated sensor tip. Dismantle the sensor, clean its tip, and refit the sensor using the specified tightening torque.
How to fix sluggish start-up of ABB HT845057?
A sluggish start-up of your ABB Industrial Equipment might be due to a contaminated turbocharger, a damaged bearing, a rubbing rotor, or a foreign object in the turbocharger. Try cleaning the turbocharger first. If the bearing is damaged, contact an ABB Turbocharging Service Station.
How to troubleshoot turbocharger surging in ABB Industrial Equipment?
To troubleshoot turbocharger surging in ABB Industrial Equipment, check the following: * If the guard in front of the turbocharger is contaminated or damaged, clean or replace it. * If the filter silencer or diffuser is contaminated, clean it. * If the cooler is contaminated, clean it.
Why is there an increase in speed in my ABB HT845057 Industrial Equipment?
An increase in speed in your ABB Industrial Equipment could be due to a heavily contaminated nozzle ring (with 4-stroke application). If this is the case, you should contact an ABB Turbocharging Service Station.
Why is my ABB HT845057 making noises during run-down?
If you are experiencing noises during run-down of your ABB Industrial Equipment, it could be due to a contaminated turbocharger, which requires cleaning. Alternatively, it could be caused by a damaged bearing, in which case you should contact an ABB Turbocharging Service Station.
Why is my ABB Industrial Equipment having vibrations?
Vibrations in your ABB Industrial Equipment can be caused by rotor unbalance. In this case, it is necessary to contact an ABB Turbocharging Service Station.
How to fix sluggish start-up in ABB HT845057 Industrial Equipment?
A sluggish start-up of your ABB Industrial Equipment could be caused by a contaminated turbocharger, which you can resolve by cleaning it. It may also be due to a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other potential causes are rubbing rotor or a foreign object in the turbocharger.
General| Brand | ABB |
|---|---|
| Model | HT845057 |
| Category | Industrial Equipment |
| Language | English |
