ABB HT845102 - User Manual

132 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Operation Manual

ABB Turbocharging



ABB Turbo Systems Ltd

CH 5401 Baden

Type TPS 52E01 HT845102

n

Mmax

859 t

Mmax

680

n

Bmax

816 t

Bmax

650

1/s °C

SOLD08 00250 12 60 60

Year 2020

made in Switzerland

Application according to

the Operation Manual

kg

HZTL2410 English

TPS 52E01

Original Operation Manual

Table of Contents

Questions and Answers

R
Ryan MejiaSep 1, 2025
Why is the exhaust gas temperature too high in my ABB Battery Charger?
- D
  Daniel FloresSep 1, 2025
  High exhaust gas temperature in your ABB Battery Charger can stem from several issues: * A malfunctioning injection system, which needs repair or manufacturer consultation. * Air starvation due to a clogged filter silencer, requiring cleaning. * High exhaust counterpressure, necessitating cleaning or repair of the boiler or exhaust silencer. * A dirty cooler, which should be cleaned. * Insufficient cooling water volume, requiring a top-up. * High cooling water entry temperature, indicating a need to inspect/clean the cooling system. * Inadequate ventilation, suggesting improved ventilation.
N
nguyenjoseSep 22, 2025
What causes turbocharger surging in ABB Battery Charger?
- M
  Miranda EricksonSep 22, 2025
  If your ABB Battery Charger is surging, the guard in front of the turbocharger might be contaminated or damaged, requiring cleaning or replacement. Alternatively, the filter silencer or diffuser could be contaminated and need cleaning. Another potential cause is a contaminated cooler, which should also be cleaned.
C
Catherine MarquezSep 13, 2025
What to do if ABB Industrial Equipment has vibrations?
- B
  Brandon SmithSep 13, 2025
  If your ABB Industrial Equipment is experiencing vibrations, it could be due to a rotor unbalance. In this case, contact an ABB Turbocharging Service Station. Vibrations may also be caused by a damaged turbine or compressor, or a damaged bearing.
L
lori80Sep 23, 2025
Why is the charge air pressure too high in my ABB Battery Charger?
- S
  Samantha OrtegaSep 23, 2025
  If the charge air pressure is too high in your ABB Battery Charger, it could be due to a malfunctioning or poorly adjusted injection system, which needs to be repaired or corrected. Another possible reason is that the engine performance is higher than expected, which warrants checking the engine performance.
C
Christy WattsSep 23, 2025
How to fix sluggish start-up of ABB Battery Charger?
- P
  Phyllis AlvarezSep 23, 2025
  A sluggish start-up in your ABB Battery Charger can be caused by a contaminated turbocharger, in which case you should clean it. Alternatively, it might be due to a damaged bearing, which requires you to contact an ABB Turbocharging Service Station.
C
castrocharlesAug 28, 2025
What to do if rotating parts are rubbing in my ABB Battery Charger?
- W
  wpenningtonAug 28, 2025
  If you suspect rubbing, it's crucial to contact an ABB Turbocharging Service Station to assess the extent of the issue.
I
inewtonAug 27, 2025
How to fix a sluggish start-up in ABB HT845102 Industrial Equipment?
- K
  Kelly RyanAug 27, 2025
  If your ABB Industrial Equipment has a sluggish start-up, it might be due to a contaminated turbocharger, in which case you should clean it. Alternatively, a damaged bearing could be the cause, requiring you to contact an ABB Turbocharging Service Station.
P
Parker BurkeAug 27, 2025
How to deal with rubbing of rotating parts in ABB HT845102?
- L
  Laura SmithAug 27, 2025
  If you notice rubbing of rotating parts within your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
V
Vanessa MartinezAug 26, 2025
Why is my ABB Industrial Equipment start-up sluggish?
- J
  John LongAug 26, 2025
  A sluggish start-up of your ABB Industrial Equipment can be attributed to several factors. The turbocharger may be contaminated and needs cleaning. Alternatively, there could be a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other possible causes include a rubbing rotor or a foreign object present in the turbocharger.
J
Jerry CarterSep 23, 2025
How to fix sluggish start-up on ABB Battery Charger?
- N
  Nicholas SextonSep 23, 2025
  If your ABB Battery Charger experiences a sluggish start-up, it could be due to a contaminated turbocharger, which should be cleaned. Alternatively, it might be caused by a damaged bearing, in which case you should contact an ABB Turbocharging Service Station.

ABB HT845102 Specifications

General

ABB Type Designation	HT845102
Rated Operational Voltage	1000 V
Sub-Function	Disconnect
Type	Disconnect
Rated Voltage	1000 V

Related product manuals

Preview: ABB HT845243

Preview: ABB HT845675