ABB HT845240 User Manual

132 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Operation Manual

ABB Turbocharging



ABB Turbo Systems Ltd

CH 5401 Baden

Type TPS48-F32 HT845240

n

Mmax

1034 t

Mmax

680

n

Bmax

982 t

Bmax

650

1/s °C

SOLD08 00180 12 60 60

Year 2020

made in Switzerland

Application according to

the Operation Manual

kg

HZTL2412 English

TPS48-F32

Original Operation Manual

Table of Contents

Questions and Answers:

J
jamesjacksonSep 2, 2025
What to do if lubricating oil pressure is too low in ABB HT845240?
- A
  Arthur NielsenSep 2, 2025
  If the lubricating oil pressure is too low, the oil filter may be heavily contaminated and needs cleaning. Alternatively, the oil pump in the lubricating system could be defective and requires checking or replacement. A wrong reading on the manometer display can also cause this issue, so replace the manometer. In some instances, the rotor axial clearance may be too large, which requires contacting an ABB Turbocharging Service Station.
D
Derek Martinez MDSep 3, 2025
Why is there a reduction in speed in ABB HT845240?
- E
  Evan JacksonSep 3, 2025
  A reduction in speed could stem from defects in connected cylinders during pulse charging, in which case you should contact the enginebuilder. Other potential causes include heavy contamination of the turbine (clean it), damaged rotor components or bearing (contact an ABB Turbocharging Service Station), or defects like leaks in the exhaust gas pipes or charge air ducts (make repairs).
M
murphysusanSep 3, 2025
What to do if ABB HT845240 Industrial Equipment has charge air pressure too low?
- B
  Benjamin CruzSep 3, 2025
  If the charge air pressure is too low, there could be several reasons. The air receiver or the gas piping between the engine and the turbine might be leaking. A poorly adjusted injection system also can cause this issue, so correct it. The manometer display might be providing a wrong reading, so replace the manometer, or the line to the manometer might be leaking, so repair the leak. A contaminated filter silencer causing excessive loss of pressure can also be the reason, so clean it. In some cases, the compressor/turbine might be damaged, which requires contacting an ABB Turbocharging Service Station. High exhaust counterpressure can also cause low charge air pressure, so clean or repair the boiler or exhaust silencer.

ABB HT845240 Specifications

General

Rated Current	40 A
Rated Voltage	240 V AC
Poles	2
Mounting	DIN Rail
Type	Circuit Breaker
Standards	IEC/EN 60898-1

Related product manuals

Preview: ABB HT845243

Preview: ABB HT845675