ABB PowerValue 11 RT - Page 2

04-3847_ABB_OPM_RackMountingKit_ PVA11 RT1-3kVA_EN_131129 Page 2/2 ABB
Modifications reserved
2) Fix the slides to the rack using M6 round screws and clip nuts.
3) Tighten the M4 screws in the middle of the slides
4) Attach the 90º metal pieces (ears) to the UPS using 8 flat M4 screws
5) Slide the UPS into the rack and screw it as indicated with 2 x M6 screws and 2 x M6 nuts.