1MRK 505 351-UEN Section 1
Introduction
Commissioning Manual 5
Distributed busbar protection REB500
1.4.2 Document conventions
A particular convention may not be used in this manual.
• Abbreviations and acronyms in this manual are spelled out in the glossary. The
glossary also contains definitions of important terms.
• Push button navigation in the LHMI menu structure is presented by using the
push button icons, e.g.:
To navigate the options, use and .
• HMI menu paths are presented in bold, e.g.:
Select Main menu/Settings.
• LHMI messages are shown in Courier font, e.g.:
To save the changes in non-volatile memory, select Yes and ….
• Parameter names are shown in italics, e.g.:
The function can be enabled and disabled with the Operation setting.
• The * character after an input or output signal name in the function block
symbol given for a function indicates that the signal must be connected to
another function block in the application configuration to achieve a valid
application configuration.
To Next Page
Loading...
