What to do if the ABB REG670 (I/O module name) fails?
If I/O modules has failed, check that the I/O module has been configured and connected to the IOP1- block. If the problem persists, contact your ABB representative for service.
What to do if the ABB REG670 ADC-module fails?
If the AD conversion module has failed, contact your ABB representative for service.
What to do if the ABB REG670 Protection Device internal warning is on?
If a warning has been issued, check the rest of the indicated results to find the fault.
What to do if the ABB REG670 Protection Device internal fail is on?
If a failure has occurred, check the rest of the indicated results to find the fault.
Lists warnings and cautions to be followed when handling the IED.
Describes the functions of the IED's front panel keypad.
Explains how to navigate through the HMI menus and screens.
Explains how to generate and identify disturbance records.
Details how to view general information and indications of disturbance records.
Configuration of differential protection settings.
Parameters for apparatus control functions.
Explains how to activate and deactivate functions for testing.
Describes how to individually release protections for testing.
Details the process for logging on and off the IED.
General| Brand | ABB |
|---|---|
| Model | REG670 |
| Category | Protection Device |
| Language | English |
To Next Page
