ABB REL670 - Page 23

IEC 61850 or function
name
ANSI Function description Line Distance
REL670
(Customized)
REL670 (A41) REL670 (A42)
REL670 (B42)
REL670 (D42)
ZC1PPSCH 85 Phase segregated scheme communication logic for
distance protection
0-2 1-B05 1-B05 1-B05
ZCRWPSCH 85 Current reversal and weak-end infeed logic for
distance protection
0-2 1 1 1 1
ZC1WPSCH 85 Current reversal and weak-end infeed logic for phase
segregated communication
0-2 1-B05 1-B05 1-B05
ZCLCPSCH Local acceleration logic 0-1 1 1 1 1
ECPSCH 85 Scheme communication logic for residual overcurrent
protection
0-1 1 1 1
ECRWPSCH 85 Current reversal and weak-end infeed logic for residual
overcurrent protection
0-1 1 1 1
DTT Direct transfer trip 0-1
Table 7. Number of function instances in Synchrophasor report, 8 phasors
Function name
Function description Number of instances
PMUCONF Configuration parameters for C37.118 2011 and IEEE1344 protocol 1
PMUREPORT Protocol reporting via IEEE 1344 and C37.118 1
PHASORREPORT1 Protocol reporting of phasor data via IEEE 1344 and C37.118, phasors 1-8 1
ANALOGREPORT1 Protocol reporting of analog data via IEEE 1344 and C37.118, analogs 1-8 1
BINARYREPORT1 Protocol reporting of binary data via IEEE 1344 and C37.118, binary 1-8 1
SMAI1–SMAI12 Signal matrix for analog inputs 1
3PHSUM Summation block 3 phase 6
PMUSTATUS Diagnostics for C37.118 2011 and IEEE1344 protocol 1
1MRK 506 372-BEN -
Line distance protection REL670 2.2
Product version: 2.2
ABB 23