25. Tools
The IED is delivered as a pre-configured unit.
The default parameter setting values can be
changed from the front-panel user interface,
the web-browser based user interface
(WebHMI) or the PCM600 tool in
combination with the IED-specific
connectivity package.
The Protection and Control IED Manager
PCM600 is available in three different
variants, that is PCM600, PCM600
Engineering and PCM600 Engineering Pro.
Depending on the chosen variant, PCM600
offers extensive IED configuration functions
such as IED signal configuration, application
configuration, graphical display configuration
including single line diagram configuration,
and IEC 61850 communication configuration
including horizontal GOOSE communication.
When the web-browser based user interface
is used, the IED can be accessed either
locally or remotely using a web browser (IE
7.0 or later). For security reasons, the web-
browser based user interface is disabled by
default. The interface can be enabled with
the PCM600 tool or from the front panel user
interface. The functionality of the interface
can be limited to read-only access by means
of PCM600.
The IED connectivity package is a collection
of software and specific IED information,
which enable system products and tools to
connect and interact with the IED. The
connectivity packages reduce the risk of
errors in system integration, minimizing
device configuration and set-up times.
Further, the Connectivity Packages for the
615 series IEDs include a flexible update tool
for adding one additional local HMI language
to the IED. The update tool is activated using
PCM600 and enables multiple updates of the
additional HMI language, thus offering
flexible means for possible future language
updates.
Table 76. Tools
Configuration and setting tools Version
PCM600 2.3
Web-browser based user interface IE 7.0 or later
REM615 Connectivity Package 3.0.1 or later
Motor Protection and Control 1MRS756890 D
REM615
Product version: 3.0 Issued: 2010-06-29
ABB 59
To Next Page
Loading...
