ABB RER620 - Section 2 IEC 60870-5-101;104 data mappings

1MAC302441-MB A Section 2
IEC 60870-5-101/104 data mappings
RER620 11
Point List Manual
Section 2 IEC 60870-5-101/104 data mappings
2.1 Overview
This document describes the IEC 60870-5-101/104 data points and structures available in
RER620 Ver. 1.0.
The point tables show all the available IEC 60870-5-101/104 data points in this IED. The
points are grouped into four tables: Analog Values, Binary Controls, Indications, and
Integrated Totals and Regulating Step Positions. Within each group the data objects are
listed in order based on the objects' Information Object Address (IOA). The IEC
60870-5-101/104 points can be freely added, removed, reorganized and reconfigured
using PCM600.
This list represents the superset of IEC 60870-5-101/104 points. The actual set of available
points is determined by the IED”s ordercode. An asterisk (*) in a No Events column
indicates that no events are enabled by default for that point. The word “Disabled” in
Disabled column indicates that the point is not active by default. Inactive points can be
made active through PCM600.