EasyManua.ls Logo

ABB RET 543 - Measurement Functions

ABB RET 543
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1MRS755225
Transformer Terminal
Technical Reference Manual, General
RET 54_
25
5.1.1.2. Measurement functions
The measurement function blocks are documented on the CD-ROM “Technical
Descriptions of Functions” (refer to “Related documents” on page 9).
NPS3Low Negative-phase-sequence (NPS) protection, low-set stage
NPS3High Negative-phase sequence (NPS) protection, high-set stage
OE1Low Overexcitation protection, low-set stage U/f>
OE1High Overexcitation protection, high-set stage U/f>>
OV3Low Three-phase overvoltage protection, low-set stage
OV3High Three-phase overvoltage protection, high-set stage
PSV3St1 Phase-sequence voltage protection, stage 1
PSV3St2 Phase-sequence voltage protection, stage 2
REF1A High-impedance based restricted earth-fault protection
REF4A Stabilized restricted earth-fault protection (high voltage side)
REF4B Stabilized restricted earth-fault protection (low voltage side)
ROV1Low Residual overvoltage protection, low-set stage
ROV1High Residual overvoltage protection, high-set stage
ROV1Inst Residual overvoltage protection, instantaneous stage
TOL3Dev Three-phase thermal overload protection for devices
UI6Low Three-phase underimpedance protection, low-set stage
UI6High Three-phase underimpedance protection, high-set stage
UV3Low Three-phase undervoltage protection, low-set stage
UV3High Three-phase undervoltage protection, high-set stage
Table 5.1.1.1-1 Protection functions available for the RET 54_
Function Description
Table 5.1.1.2-1 Measurement functions available for the RET 54_
Function Description
MEAI1 General measurement 1 / analog input on RTD/analog module
MEAI2 General measurement 2 / analog input on RTD/analog module
MEAI3 General measurement 3 / analog input on RTD/analog module
MEAI4 General measurement 4 / analog input on RTD/analog module
MEAI5 General measurement 5 / analog input on RTD/analog module
MEAI6 General measurement 6 / analog input on RTD/analog module
MEAI7 General measurement 7 / analog input on RTD/analog module
MEAI8 General measurement 8 / analog input on RTD/analog module
MEAO1 Analog output 1 on RTD/analog module
MEAO2 Analog output 2 on RTD/analog module
MEAO3 Analog output 3 on RTD/analog module
MEAO4 Analog output 4 on RTD/analog module
MECU1A Neutral current measurement, stage A
MECU1B Neutral current measurement, stage B
MECU3A Three-phase current measurement, stage A
MECU3B Three-phase current measurement, stage B
MEDREC16 Transient disturbance recorder
MEFR1 System frequency measurement
MEPE7 Three-phase power and energy measurement
MEVO1A Residual voltage measurement, stage A
MEVO1B Residual voltage measurement, stage B

Table of Contents

Other manuals for ABB RET 543

Related product manuals