ABB RET 543 - Alarm LED Indicators

1MRS755225
Transformer Terminal
Technical Reference Manual, General
RET 54_
87
menupict_RET
Fig. 5.1.15.-2 Menu level structure
For more detailed information about the HMI, refer to the RE_ 54_ Operator’s
Manual (see“Related documents” on page 9).
5.1.16. Alarm LED indicators
The RET 54_ transformer terminal offers eight alarm LED indicators to be
configured with the Relay Mimic Editor. The LED colors are green, yellow or red,
and their use can be freely defined (for defining the ON and OFF state texts, refer to
Section “MIMIC configuration” on page 32). Three basic operation modes are
supported:
• Non-latched light
• latched-steady light
• latched blinking light
Alarms can be acknowledged remotely, locally or by using logic.
The alarm channels include time tagging for detected alarms. The time tagging
principle used depends on the operation mode.
NOC3Low
Setting group 1
MEASUREMENT
EVENT view
ALARM view
USER LEVEL (LEVEL 1)
TECHNICAL LEVEL (LEVEL 2)
MIMIC view MEASUREMENT view
EVENTS
NOC3Low 31/E1
1999-12-24
18:35:12.230
NOC3Low 31/E1
1999-12-24
18:35:12.330
NOC3High 32/E1
1999-12-24
14:25:52.720
NOC3High 32/E3
1999-12-24
14:25:52.760
Event list
MEAS ALARM
CB spring ready
SF6 gas density
Temperature
Interlocking
PARAMETER MENU
GROUP MENU
MAIN MENU
MAIN MENU
2 Sec
1 Sec
Protection
SUBGROUP MENU
Operation mode
= Definite time
Start current
= 3.1 x In
Operate time
= 041.03 s
Time multiplier
= 0.78
IEEE time dial
= 0.5
C clears ALARMs
EVENT MIMIC
Updating values
MIMIC EVENT
Actual setting
Setting group 1
Setting group 2
Control setting
Input data
Output data
Recorded data 1
Recorded data 2
Recorded data 3
Status
Protection
Control
Cond. monit.
Measurement
Communication
General func.
Tests
Information
Configuration
DEF2Low_a
DEF2High_a
DEF2Inst_a
Freq1_a
Freq2_a
Freq3_a
Freq4_a
Freq5_a
Inrush3_a
NEF1Low_a
NEF1High_a
NEF1Inst_a
NOC3Low_a
NOC3High_a
NOC3Inst_a
MIMIC view
ALARM MEAS
E MIMIC Submenu
, Move cursor
MainMenu Next
, Move cursor
Prev. Param.
, Move cursor
Prev. E Set
, Move cursor
IL1-A 00250.0
IL2-A 00252.0
IL3-A 00249.0
Io-A 00000.0
Iob-A 00000.0
Uo-V 000000
U1-kV 020.00
U2-kV 020.00
U3-kV 020.00
f-Hz 50.00
Demand values
IL1-A 00248.0
IL2-A 00251.0
IL3-A 00250.0
Power
P-kW 006928
ALARM
Q1
Q9
Q4
Q0
AVR
AUT
PAR
ON
0 . 0 A
0 . 0 A
0 . 0 kV
0 . 0 A Io
0POS