# Description
9
-
10
Communication modules (Serial/Ethernet)
Serial RS-485, incl. an input for IRIG-B + Ethernet 100Base-FX
(1 x LC)
AA
Serial RS-485, incl. an input for IRIG-B + Ethernet 100Base-TX (1
x RJ-45)
AB
Serial RS-485, incl. an input for IRIG-B AN
Serial glass fibre (ST), incl. an RS-485 connector and an input for
IRIG-B (cannot be combined with arc protection)
BN
Serial glass fibre (ST) + Ethernet 100Base-TX (1 x RJ-45) + Serial
RS-485 connector, RS-232/485 D-Sub 9 connector + input for
IRIG-B (cannot be combined with arc protection)
BB
Serial glass fibre (ST) + Ethernet 100Base-TX (3 x RJ-45) BD
Serial glass fibre (ST) + Ethernet 100Base-TX and -FX (2 x RJ-45
+ 1 x LC)
BC
Serial glass fibre (ST) + Ethernet 100Base-TX and -FX (1 x RJ-45
+ 2 x LC)
BE
Ethernet 100Base-FX (1 x LC) NA
Ethernet 100Base-TX (1 x RJ-45) NB
Ethernet 100Base-TX (2 x RJ-45 + 1 x LC) NC
Ethernet 100Base-TX (3 x RJ-45) ND
Ethernet 100Base-TX and -FX (1 x RJ-45 + 2 x LC) NE
No communication module NN
The communication module hardware determines the available communication proto -
cols. Choose the hardware from one of the rows below to define the digits # 9-10.
If serial communication is chosen, please choose a serial communication module including Ethernet (for example “BC”) if a service
bus for PCM600 or the WebHMI is required.
H B T A B G B A B C C 1 B B N 1 X E
# Description
11 Communication protocols
IEC 61850
(for Ethernet communication modules and IEDs without a com -
munication module )
A
Modbus
(for Ethernet/serial or Ethernet + serial communication modules)
B
IEC 61850 + Modbus
(for Ethernet or serial + Ethernet communication modules)
C
IEC 60870-5-103
(for serial or Ethernet + serial communication modules)
D
DNP3
(for Ethernet/serial or Ethernet + serial communication modules)
E
H B T A B G B A B C C 1 B B N 1 X E
To Next Page
Loading...
