ABB ret650 - Basic IED Functions

IEC 61850/Function block
name
ANSI Function description Transformer
RET650 (A01)
2W/1CB
RET650 (A05)
3W/1CB
RET650 (A07)
OLTC
GOOSEVCTRRCV Voltage control receiving block for GOOSE 3 3 3
ETHFRNT
ETHLAN1
GATEWAY
Ethernet configuration of front port, LAN1 port and
gateway
GOOSEDPRCV GOOSE function block to receive a double point value 32 32 32
GOOSEINTRCV GOOSE function block to receive an integer value 32 32 32
GOOSEMVRCV GOOSE function block to receive a mesurand value 16 16 16
GOOSESPRCV GOOSE function block to receive a single point value 64 64 64
2.5 Basic IED functions
IEC 61850/Function
block name
Function description
Basic functions included in all products
INTERRSIG Self supervision with internal event list 1
SELFSUPEVLST Self supervision with internal event list 1
SNTP Time synchronization 1
TIMESYNCHGEN Time synchronization 1
DTSBEGIN, DTSEND,
TIMEZONE
Time synchronization, daylight saving 1
IRIG-B Time synchronization 1
SETGRPS Setting group handling 1
ACTVGRP Parameter setting groups 1
TESTMODE Test mode functionality 1
CHNGLCK Change lock function 1
TERMINALID IED identifiers 1
PRODINF Product information 1
PRIMVAL Primary system values 1
SMAI_20_1-12 Signal matrix for analog inputs 2
3PHSUM Summation block 3 phase 12
GBASVAL Global base values for settings 6
ATHSTAT Authority status 1
ATHCHCK Authority check 1
FTPACCS FTP access with password 1
DOSFRNT Denial of service, frame rate control for front port 1
DOSLAN1 Denial of service, frame rate control for LAN1 1
DOSSCKT Denial of service, socket flow control 1
1MRK 504 126-UEN - Section 2
Available functions
17
Commissioning Manual