ABB S500 - Switch-Gear Cabinet Assembly for S500 Modules

____________________________________________________________________________________________________________
V2 S500 Hardware 1-19 System Data S500 / Issued: 01.2007
Switch-gear cabinet assembly
Basically, it is recommended to mount the modules on an earthed mounting plate, independent of the
mounting location.
DC532DC532DC505
DC532DC532DC505
DIN rail,
earthed
Mounting
plate,
earthed
DIN rail,
earted
Mounting
plate,
earthed
Cable duct
20 mm minimum distance between
the modules and the cable duct
Figure: Installation of AC500/S500 modules in a switch-gear cabinet