Need help?Do you have a question about the ABB SACE Emax 2 E6.2 and is the answer not in the manual?
General| Rated Voltage (Ue) | Up to 690 V AC |
|---|---|
| Rated Impulse Withstand Voltage (Uimp) | 8 kV |
| Rated Short-Circuit Breaking Capacity (Ics) | 100% Icu |
| Poles | 3, 4 |
| Standards | IEC 60947-2 |
| Rated Insulation Voltage | 1000 V |
| Type | Air Circuit Breaker |
| Protection Functions | Overload, Short-circuit, Earth fault |
| Communication | Modbus, Profibus |
General safety warnings and precautions for handling the circuit breaker.
Procedures for receiving, transporting, and inspecting the circuit breaker upon arrival.
Step-by-step guide for safely unpacking and handling the circuit breaker.
Safety guidelines to follow before installation.
Instructions for mounting the fixed circuit-breaker.
Description of the different terminal types available for circuit breakers.
How to connect the circuit breaker to the power circuit.
Overview of Ekip Dip trip unit features and specifications.
Description of the Ekip Dip trip unit's operator interface components and functions.
Introduction to the protection functions offered by the Ekip Dip trip unit.
Table summarizing LED signals and their meanings for fault conditions.
Default configuration settings for the Ekip Dip trip units.
To Next Page
