Need help?Do you have a question about the ABB SACE Emax 2 E2.2 and is the answer not in the manual?
General| Rated Voltage (Ue) | Up to 690 V AC |
|---|---|
| Rated Insulation Voltage | 1000 V |
| Rated Service Short-Circuit Breaking Capacity (Ics) | 100% of Icu |
| Standards | IEC 60947-2 |
| Breaking Capacity (Icu) | 100 kA at 415 V |
| Rated Ultimate Short-Circuit Breaking Capacity (Icu) | 100 kA at 415 V |
| Poles | 3, 4 |
| Type | Air Circuit Breaker |
| Protection Functions | Overload, Short-circuit |
| Communication | Modbus, Profibus, Ethernet |
| Dimensions | Various dimensions depending on configuration |
General warnings and precautions for handling and operating the circuit breaker.
Procedures for safe transport, checking on receipt, and initial inspection of circuit breakers.
Step-by-step instructions for safely unpacking circuit breakers and handling components.
Overview of construction, panels, data plates, manual operations, and status indicators.
Procedure for inserting and removing the circuit breaker from its housing.
Safety warnings, fixed part mounting, and terminal types for installation.
Terminal compatibility, position changes, clearances, phase separators, and power connections.
Information on dimensions, anchor plates, special versions, and grounding procedures.
Overview of Ekip Dip unit, its versions, functions, electrical characteristics, and operator interface.
Introduction to protections (L, S, I, G), their parameters, and summary tables.
List of alarms, LED signals, help notes, and default parameters for the Ekip Dip unit.
General overview of electrical and mechanical accessories available for Emax 2 circuit-breakers.
Procedures for initial checks, general inspections, and putting the circuit breaker into service.
How to identify, diagnose, and resolve alarms and failures in the circuit breaker.
Procedures for safely decommissioning and treating circuit breakers at the end of their service life.
To Next Page
