ABB SACE Emax 2 E6.2 - Page 11

ABB | SACE Emax 2
Management operations
1 - Transport and checking on receipt
9 | © 2023 ABB | 1SDH001000R0002 - ECN000297030
Storage method
Place the packaging (circuit-breakers and / or fixed parts) on a horizontal plane, not in contact with the
floor. If the circuit-breaker has been removed and reinserted in the package ensure, prior to storage that:
• The circuit-breaker is in the open position and the springs are discharged. See the chapter
"Description - circuit-breaker opening/closing operations" on page 16
• The circuit-breaker is protected and locked in its original packaging
WARNING! up to three E2.2 and E4.2 circuit-breaker packages and up to two E6.2 circuit-
breaker packages can be stacked. If the packaging has been opened, you can stack the
circuit-breakers on condition that the package is re-wrapped as the original.
Figure 4
OK!
NO!
(E6.2)
2
(E2.2 - E4.2)
3
Figure 5