17
The procedure for entering a submenu or a set-
ting mode, the configuration of the module and
the operation of the TEST mode are described
in detail in "General characteristics of the D-
type relay modules". Below a short guide to the
operations:
Desired step or operation Push-button Action
Forward step in main or submenu STEP Press > 0.5 s
Rapid scan forward in main menu STEP Keep depressed
Reverse step in main or submenu STEP Press < 0.5 s
Entering a submenu from a main menu PROGRAM Press 1 s
Entering or leaving the setting mode PROGRAM Press for 5 s
Increasing a value in the setting mode STEP Press about 0.5s
Moving the cursor in the setting mode PROGRAM Press about 1 s
Storing a value in the setting mode STEP & PROGRAM Press simultaneously
To Next Page
Loading...
