To Next PageTo Next Page
Need help?Do you have a question about the ABB SPAU 341 C and is the answer not in the manual?
General| Current Input | 1 A or 5 A |
|---|---|
| Frequency | 50/60 Hz |
| Standards | IEC 60255 |
| Application | Protection of power systems |
| Functions | Overcurrent, earth fault |
| Mounting | Panel mounting |
| Voltage Input | 110-230 V AC |
| Communication Interfaces | RS-485 |
Provides an overview of the regulator's capabilities and functions.
Explains how the regulator maintains stable secondary voltage using control voltage and hysteresis.
Details the wiring diagram and terminal connections for the regulator.
Provides detailed specifications for electrical and environmental parameters.
Covers methods for operating transformers in parallel.
Guides through initial setup, precautions, and basic checks.
Details procedures for routine maintenance and common repair actions.
Provides physical dimensions and instructions for installation.
Outlines the key features and capabilities of the SPCU 1D50 module.
Explains the core voltage regulation logic of the SPCU 1D50 module.
Lists and describes the configurable parameters for the module.
Illustrates the navigation structure for module settings and data.
Lists and describes fault codes indicating module errors.
Summarizes the main characteristics and functions of the SPCN 1D56 module.
Explains the manual control functions of the SPCN 1D56 module.
Describes the layout and indicators on the module's front panel.
Guides the process of calibrating the mA input for position measurement.
Lists and describes the configurable parameters for the module.
Describes the physical layout of D-type relay module front panels.
Explains the function of the panel buttons (Reset/Step, Program).
Details the functionality and navigation of the module display.
Details the function and selection of switchgroups.
Explains how to perform output signal testing on relay modules.
