24
Data Para- Read or Value (range)
meter write
Control parameters
Remote control of settings V150 R, W 0 = main settings active
1 = second settings active
Parallel operation V152 R, W 0 = not active
1 = active
Event mask V155 R, W 0...255, see paragraph
"Event codes"
Event mask V156 R, W 0...255, see paragraph
"Event codes"
Event mask V157 R, W 0...255, see paragraph
"Event codes"
Event mask V158 R, W 0...255, see paragraph
"Event codes"
Event mask V159 R, W 0...255, see paragraph
"Event codes"
Opening of password V160 W 1...999
Closing or changing of password V161 W (P) 0...999
Activation of self-supervision V165 W 1 = self-supervision
output activated
and IRF LED lit
LED test V166 W (P) 0…3, 5…15, 21
Factory final test V167 W (P) 1 = display segment test
2 = format EEPROM
Internal error code V169 R 0…255
Um, voltage measurement calibration
parameter V176 R, W (P) -5.00…+5.00% of U
n
Module address code V200 R, W 1…254
Data transfer rate V201 R, W 4.8 or 9.6 KBd
Software version code V205 R 118_
To Next Page
Loading...
