30
Document Control Number: DOC-BEZ-DG-M12-H-EN.DOC 1 / 1
EU Declaration of Conformity
The undersigned, representing the following supplier and authorised representative:-
Baldor Electric Company
5711 R. S. Boreham, Jr. Street
Fort Smith, Arkansas 72901
USA
ABB Automation Products GmbH
Oberhausener Straße 33
40472 Ratingen, Germany
This declaration is issued under the sole responsibility of the manufacturer.
herewith declare that the Products
MTA Range of Reduction Gearboxes
Product identification (brand and
catalogue number/part number):
Sizes MTA2115H,MTA3203H,MTA4207H,MTA5215H,MTA6307H,MTA7315H, MTA8407H
I M2 c k
II 2GD c k T4
Tamb –30°C to +50°C (c-face clamp collar and c-face 3 piece coupling inputs)
Tamb –30°C to +45°C (separate input)
Sira 12ATEX6164X
are in conformity with the provisions of the following EC Directive(s) when installed in accordance with the installation
instructions contained in the product documentation:
2014/34/EU ATEX
and that the standards and/or technical specifications referenced below have been applied:
EN 13463-1:2009 Non - Electrical Equipment For Potentially Explosive Atmospheres -Method And
Requirements
EN13463-5:2011 Non-Electrical Equipment Intended For Use In Potentially Explosive
Atmospheres - Part 5: Protection by constructional Safety ‘c’
EN13463-8:2008 Non-Electrical Equipment Intended For Use In Potentially Explosive
Atmospheres - Part 8: Protection by liquid immersion ‘k’
Notified Body:
Sira Certification Services Ltd -0518
Unit 6
Hawarden Industrial Park
Hawarden
DEESIDE
CH5 3US
Certificate: SIRA 12ATEX6164
Supplier: Authorised representative:
Signature
Signature
Name: L. Evans Massey Name: Michael Klein
Position: Manager Standards and Certification Position: Regional Sales and Marketing Manager Central
Europe
Date: 14 August 2018 Date: 14 August 2018
To Next Page
Loading...
