ABB Tmax MOE/E T6

MOE - MOE/E - Comando a motore ad accumulo di energia T6
MOE - MOE/E - Stored energy operating mechanism T6
MOE - MOE/E - Motorantrieb mit energiespeicherung T6
MOE - MOE/E - Commande par moteur a accumulation d’energie T6
MOE - MOE/E - Mando a motor con acumulacion de energia T6
DOC. N.° 1SDH000479R0621 - B1027
Tmax
Durata minima impulso di comando 0,15s
Control impulse minimum time 0,15s
Mindestdauer des Steuerimpulses 0,15 s
Durée minimale de l'impulsion de commande 0,15s
Duración mínima del impulso de mando 0,15s
1 2
Tensione nominale di impiego
Rated service voltage
Bemessungsbetriebsspannung
Tension assignée de service
Tensiòn nominal de servicio
Potenza spunto
inrush power consumption
Leistungsaufnahme beim Anzug
consommation à l’appel
potencia absorbida al arranque
Potenza in servizio
continuous service input
Leistungsaufnahme bei Dauerbetrieb
Consommation (service continu)
potencia absorbida en servicio permanente
24 Vcc
48...60 Vcc
110...125 Vcc-ca
220...250 Vcc-ca
380 Vca
300 VA-W
150 VA-W
ON OFF
Riarmo / Reset
Rückstellung
Reset / Rearme
Tempo di manovra
Operation time
Schaltzeit
Temps de manoeuvre
Tiempo de maniobra
5 s3 s < 0,1 s
Norma di riferimento
Standard
Vorschrift
Norme
Norma
IEC 60947.2
1
2
4
5
optional for W
Solo per W
Only for W
Nur für W
Uniquement W
Sólo para W
Solo per F
Only for F
Nur für F
Uniquement F
Sólo para F
Solo per MOE-E
Only for MOE-E
Nur für MOE-E
Uniquement MOE-E
Sólo para MOE-E
3
L
H

ABB Tmax MOE/E T6 Specifications

General

Rated Voltage	Up to 690 V AC
Number of Poles	3P, 4P
Frame Size	T6
Rated Operational Voltage	690 V AC
Standards	IEC 60947-2
Protection Class	IP20

Summary

MOEE Motor Mechanism Overview

Technical Specifications

Details on voltage, power, timing, standards, and impulse duration.

Assembly and Installation

Component Mounting and Preparation

Illustrates mounting of key components and preparation for wiring.

Installation Details

Variant-Specific Assembly and Connections

Covers optional connectors for 'W' variants and MOE/E assembly.

MOEE Assembly Steps

Details further assembly steps specifically for the MOE/E version.

MOEE Specific Integration

MOEE Internal Connections and Mounting

Details internal connections, auxiliary module mounting, and final assembly.

MOEE Control Unit Integration

MOEE Control Unit and Component Integration

Illustrates the integration of the control unit and related components for MOE/E.

W Variant Assembly

W Variant Component Mounting

Details the mounting of specific components for the 'W' variant.

W Variant Connections and Disassembly Prep

W Variant Final Connections

Covers final connections for the 'W' variant.

Disassembly Preparation

Steps to prepare for the disassembly process.

Final Assembly and Testing

Final Component Attachment and Torque

Illustrates final component attachment with specified torque.

Variant-Specific Installation

F Variant Installation and Dimensions

Details installation procedures and dimensional data for the 'F' variant.

Wiring Diagram and Legend

MOE-E Wiring Schematic

Presents the wiring schematic and legend for MOE-E.