ABB Totalflow NGC8206 - Sample Conditioning and Stream Connections

2
COLD WEATHER
ENCLOSURE MOUNTED
WALL SHELF MOUNTING
WALL SHELF
STAND-ALONE PIPE MOUNTED
PIPE RUN MOUNTED
PIPE
SADDLE
2" MOUNTING
PIPE
CWE
MOUNTING
PLATE
OPTIONAL
MOUNTING PIPE
W/FLANGE
Step 3 Install the Sample Conditioning Bracket and Sample
Conditioning Modules, and Connect to Feed-Through
Assembly
IMPORTANT: A particulate filter with a liquid/vapor separator sample
conditioning module is strongly recommended. Operating the NGC
without a sample conditioning module can allow liquids and particulates
to contaminate columns. This can damage the unit and void the
warranty.
If none are required, connections are made directly to the feed-through
assembly.
3A Mount the sample conditioning bracket on the pipe.
2" Pipe
U-Bolt
VIEW A-A
A
A
A
A
B
B
VIEW B-B
SINGLE MODULE BRACKET
MULTIPLE MODULE BRACKET
Installation