Operation Manual / TPL67-C.. - TPL71-C..
bocharger
Page 8
© Copyright 2016 ABB. All rights reserved.
April 2016 HZTL2488_EN Revision C
Intended use of the turbocharger
1.3
This turbocharger supplied by ABB Turbo Systems has been developed
for use on diesel engines to generate the volume of air and the charg-
ing pressure required to operate the engine.
The enginebuilder has provided ABB Turbo Systems with information
regarding the intended purpose of use of the engine, from which the
specific operating limits shown on the turbocharger rating plate (such as
speeds, temperatures and replacement intervals) have been deter-
mined.
Any other use is considered to be a special application, which must first
be clarified with ABB Turbo Systems. The manufacturer accepts no lia-
bility for any other type of use. If the equipment is used for any other
purpose, ABB Turbo Systems reserves the right to reject all warranty
claims.
This turbocharger was built according to state-of-the-art technology and is
operationally safe according to recognised safety regulations.
Improper operation and maintenance of the turbocharger can result in
danger to life and limb of the user or third parties. In addition, improper
use may cause damage to the machine.
The machine may be operated only by trained personnel.
Use of the turbocharger as intended also includes observance of the in-
stallation / fitting, disassembly / removal, operating, maintenance / servic-
ing and repair conditions specified by the manufacturer. Disposal regula-
tions set down by local authorities must be observed.
The turbocharger may be installed only when in technically perfect condi-
tion while observing the instructions given in the engine builder's manual.
It may be used only for the intended purpose and operated in compliance
with the operation manual.
Malfunctions which could affect safety must be eliminated immediate-
ly.
The manufacturer accepts no liability for any damage resulting from unau-
thorised alterations to the turbocharger.
To Next Page
Loading...
