Need help?Do you have a question about the ABB XI16E1 and is the answer not in the manual?
General| ABB Type Designation | XI16E1 |
|---|---|
| Input Voltage | 24 V DC |
| Number of Inputs | 16 |
| Mounting | DIN rail |
| Input Type | Digital |
| Type | Input module |
Covers the technical specifications of the basic units, including I/O, interfaces, and memory.
Presents a comparative table of technical specifications for 40 and 50 series basic units.
Details centrally extensible remote units, including their views and specifications.
Provides technical specifications for ICMK 14 F1, ICMK 14 N1 models.
Covers digital central extensions, their views, and detailed specifications.
Details specifications for various digital central extensions like XI 16 E1, XO 08 R1, XC 08 L1.
Covers the analog central extension, its view, and technical specifications.
Provides technical specifications for analog central extensions like XM 06 B5, XE 08 B5, XTC 08.
Covers guidelines for implementing an AC31 system, including assembly and cabling rules.
Explains basic earthing principles and methods for multiple cabinets and noise sources.
Details the CS31 system bus, its cabling requirements, termination, and bus amplifiers.
Covers power supply connections, input/output cabling, and output protection for basic and remote units.
Provides cabling instructions for various digital central extensions like XI 16 E1, XO 08 R1, XC 08 L1.
Details cabling instructions for analog central extensions XM 06 B5 and XE 08 B5.
Explains addressing of inputs/outputs and units within AC31 systems.
Explains how to address basic units and their connected central extensions.
Describes addressing slave units and remote extensions on the CS31 system bus using rotary switches.
Explains methods for initializing basic units, including cold start, warm start, and software restarts.
Covers configuration tools and system constants for setting up the basic unit's operating parameters.
Lists system constants and their meanings for configuring operating modes and system behavior.
Explains CS31 bus communication between basic units, covering master/slave roles and addressing.
Details how to configure basic units as master or slave using system constant KW 00,00.
Details MODBUS® RTU protocol, its capabilities, and configuration examples for AC31 units.
Explains how to configure the MODBUS® interface using system constant KW 00,06 and SINIT function.
To Next Page
