13
i-STAT
Alinity — Quick Reference Guide Art: 731848-01 Rev. M Rev. Date: 25-Jul-2022
i-STAT ALINITY BASE STATION (CONT.)
NOTE:
• The AC adapter power supply plug acts as a disconnect device for the Base
Station and therefore, the AC socket outlet must be installed (or located)
near the Base Station and must be easily accessible if the Base Station needs
to be unplugged. When correctly connected to power, the blue light on the
Base Station will be illuminated. After an instrument is docked, the blue
light above the screen will be illuminated. This may take several seconds.
If the blue light does not illuminate, check the power supply. Ensure that
the Base Station is connected properly and that the instrument is seated
correctly in the Base Station.
• Protection provided by this equipment may be impaired if used in a manner
not specied by Abbott Point of Care.
• The instrument and its peripherals are not listed by any authority with
respect to suitability for use in oxygen-enriched atmospheres.
• The Base Station must be on a at, level, horizontal surface such as a table
top. Falling equipment may cause injury. Always place the equipment on a
stable level surface in a location where it will not cause injury if dropped.
SECTION 2
To Next Page
Loading...
