Need help?Do you have a question about the Abbott FreeStyle Precision Pro and is the answer not in the manual?
General| Measurement Method | Electrochemical |
|---|---|
| Sample Type | Capillary Whole Blood |
| Test Time | 5 seconds |
| Operating Temperature Range | 10°C to 40°C (50°F to 104°F) |
| Operating Humidity Range | 10% to 90% RH (non-condensing) |
| Device Type | Blood Glucose Monitoring System |
| Power Source | 2 x AAA batteries |
| Measuring Range | Glucose: 20 to 500 mg/dL |
| Sample Size | 0.6 μL |
| Measurement Range | Glucose: 20 to 500 mg/dL, Ketones: 0.0 to 8.0 mmol/L |
| Sample Volume | 0.6 μL |
| Battery Life | Approximately 1000 tests |
Provides critical safety warnings and precautions for using the meter, including dangers of misuse and supervision.
Provides essential guidelines for accurate patient test results, including handling and strip usage.
Step-by-step procedure for performing a glucose test using the FreeStyle Precision Pro meter.
Step-by-step procedure for performing a glucose test using the Precision Xceed Pro meter.
Step-by-step procedure for performing a ketone test using the appropriate test strips.
Essential guidelines for obtaining optimal quality control results using the FreeStyle Precision Pro system.
Procedure for performing glucose control tests to verify meter and strip performance.
Procedure for performing ketone control tests, applicable when ketone testing is enabled.
Details configuration settings for the meter, managed via the data management system.
Procedure for uploading data from the meter to the data management system using the docking station.
Explains automatic data upload via wireless network once the meter is properly configured.
Describes conditions causing erroneous patient test results and their possible reasons.
Provides a checklist to resolve out-of-range control test results.
Offers steps to troubleshoot linearity test results that fall outside the expected range.
Addresses issues related to wireless connectivity, signal strength, and data upload problems.
Provides solutions for problems encountered during barcode scanning, including isolation bag use.
Lists error messages, their explanations, and recommended actions to resolve meter issues.
Steps to prepare for contacting Abbott technical support, including collecting test results.
Step-by-step guide for removing and replacing the meter's strip port module.
Procedure for installing new AA batteries into the meter, ensuring correct polarity.
To Next Page