Abbott FreeStyle Precision Pro - Meter Identification; Menu Tree

2-8
Questions? Refer to Page 11-22 For Technical Support Instructions.
Chapter 2: Using the Meter
Meter Identification
Each meter has a unique serial number. e FreeStyle Precision Pro meter also features an untextured area on the side of
the device. is 22 mm wide (0.875 inch) x 12 mm (0.483 inch) high area allows a facility to apply a label with information
pertaining to the meter. Please refer to Chapter 1 for an illustration of this feature.
Menu Tree
When using the FreeStyle Precision Pro meter you will navigate between two main menus, Test Mode and Menu Mode. Test
Mode is used to perform patient tests and control tests. Menu Mode is used to review data, perform linearity and prociency
tests and review the meter’s conguration settings and status (e.g. battery voltage). e conguration options shown in Menu
Mode must be congured using a data management system and the Wireless Set-Up Utility (optional). You can visually verify
existing meter settings, but cannot change them.
e Menu Mode portion of the soware is set up like a tree, with various levels of sub-menus. e FreeStyle Precision Pro Menu
Tree, shown below, illustrates the multiple sub-menu layers.