5-12
Questions? Refer to Page 11-22 For Technical Support Instructions.
Chapter 5: Data Review
Data Review for Proficiency Data
The meter stores the last 20 prociency test results. Please refer to the beginning of this Data Review chapter for step-by-step
instructions to access the Data Review menu.
What You See on the Display What You Do Comments
1. Press 5 to select Proficiency Data.
The meter shows the most recent
proficiency test result.
Note: The following section illustrates some common settings. Depending on your facility’s specific settings,
some screens will display differently or not at all. If the meter does not display the screens shown,
please refer to Chapter 11, Troubleshooting.
To Next Page
Loading...
