5-14
Questions? Refer to Page 11-22 For Technical Support Instructions.
Data Review for Linearity Data
e meter stores the last linearity panel that includes a maximum of 4 replicates for 5 levels (20 tests). Please refer to the
beginning of this Data Review chapter for step-by-step instructions to access the Data Review menu.
What You See on the Display What You Do Comments
1. Press 6 to select Linearity Data.
The meter shows linearity tests first by level
(1, 2, 3, 4, 5) then by order within each level.
If no tests are stored for a level, then that
level is skipped. At the top of the display, the
level (1 to 5) and test replicate (1 to 4) are
displayed.
Note: The following section illustrates some common settings. Depending on your facility’s specific settings,
some screens will display differently or not at all. If the meter does not display the screens shown,
please refer to Chapter 11, Troubleshooting.
Chapter 5: Data Review
To Next Page
Loading...
