5-10
Questions? Refer to Page 11-22 For Technical Support Instructions.
Data Review for Control Data
The meter stores the last 1,000 control test results. Please refer to the beginning of this Data Review chapter for step-by-step
instructions to access the Data Review menu.
What You See on the Display What You Do Comments
1. Press 4 to select Control Data.
e meter shows the result of the most recent
control test.
Note: The following section illustrates some common settings. Depending on your facility’s specific settings,
some screens will display differently or not at all. If the meter does not display the screens shown,
please refer to Chapter 11, Troubleshooting.
Chapter 5: Data Review
To Next Page
Loading...
