1-7
Questions? Refer to Page 11-22 For Technical Support Instructions.
Chapter 1: Overview
Conventions
e glucose unit of measure is set using the data management system. It is not changed via the meter menu. In this manual,
when a meter screen shot shows a glucose test result in one unit of measure (e.g. mmol/L) the equivalent value in the other unit
of measure (e.g. mg/dL) appears below the image. Ketone test results always appear in the mmol/L unit of measure.
100 mg/dL
IMPORTANT: Please confirm that the correct unit of measure shows on your meter with every
glucose result.
To Next Page
Loading...
