Region Code Barcode Must Be Scanned
Instrument Disabled
Locate region code barcode on INSTRUCTIONS FOR USE document.
Touch Instrument Service to begin workflow.
Alerts 1 of 1
Set Region
Code
Exit Alerts
1. Touch Set Region Code and follow prompts on screen.
2. When prompted, scan Region Code on box or letter.
3. Continue to follow prompts on the screen.
4. Once the instrument powers on, the Region Code Barcode alert
should no longer be displayed. Proceed to STEP .
If Alert screen displays again, repeat STEP .
If the Alert screen displays again, contact your Abbott representative.
TOUCH SET REGION CODE
5
5
6
SECTION 1
3
i-STAT
Alinity — Quick Reference Guide Art: 731848-01 Rev. M Rev. Date: 25-Jul-2022
New Instruments
To Next Page
Loading...
