Abbott NeuroSphere 3875 - Overview of the Therapy Screen

NOTE: Contact your clinician before receiving an MRI
scan to nd out if you can undergo the procedure and to
learn more about any risks.
You have two ways to learn if the implanted parts of
your system are MR Condional:
▪ Your personal idencaon card, which your▪
clinician or MRI technologist will use
▪
Your paent controller app
▪
– Tap to display the system informaon. The top–
of the screen displays the message “System is MR
Condional” if implanted parts of your system are
approved MR Condional models.
– Tap Mode on the Therapy screen to display the–
Mode screen. The MRI Mode opon is available if
implanted parts of your system are approved MR
Condional models.
Preparing for an MRI Scan
If you have an MR Condional system and will receive
an MRI scan, follow these guidelines:
▪ Set your IPG to MRI mode within a day before you▪
arrive for your procedure. See “Seng the IPG to
MRI Mode” (page 42) for instrucons.
▪
Charge your paent controller before the
▪
procedure.
41
–
–