Abbott NeuroSphere 3875 - Cybersecurity; Protecting Access to the Patient Controller; Wireless Security Measures

Table 6. Possible causes and soluons for potenal
issues
Problem Possible Cause Possible Soluon
opon on the Mode
screen.
Condional, you cannot
receive an MRI scan.
MRI is Not Advised
message appears.
The generator baery
voltage is too low.
Contact your clinician.
There may be a
problem with the
implanted lead or
leads.
Contact your clinician.
Your clinician may be
able to perform an
addional check to see if
MRI Mode can be set.
Cannot put the
generator in MRI
mode.
The generator is not
connected to the
paent controller.
Try connecng to the
generator again. If the
problem persists, contact
Technical Support.
The generator is in
Surgery mode.
Exit Surgery mode to set
MRI mode.
Technical Support
For technical quesons and support for your product,
use the following informaon:
▪
+1 855 478 5833 (toll-free within North America)
▪
▪
+1 651 756 5833
▪
For addional assistance, call your local Abbo Medical
representave.
72