Abbott StarClose SE - CLICK 1 - Connect Exchange Sheath to Clip Applier

• With the Exchange Sheath in place, insert the Clip Applier Flex-guide into the Sheath Hub.
• Advance the Flex-guide slowly. Do not bend the Flex-guide excessively during insertion.
• Hold the bottom of the Hub with the left hand. Firmly push the Hub into the Clip Applier.
• A “CLICK” should be heard. Gently pull on the Hub to confirm engagement.
“CLICK” 1 - Connect Exchange Sheath to Clip Applier
StarClose SE
Vascular Closure System
6
©2011 Abbott. All rights reserved. ANZ 080091 10/11