Need help?Do you have a question about the abem Terrameter SAS 4000 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Current | Up to 2.5A |
| IP Rating | IP 66 |
| Operating Temperature | -20°C to +50°C |
| Output Current | 2.5 A |
| Measurement Principle | Induced Polarization (IP) |
| Power Supply | 12 V DC |
| Data Storage | Internal memory |
| Display | LCD |
| Interface | USB |
Detailed instructions for unpacking and inspecting the Terrameter SAS 1000/4000 and its accessories upon arrival.
Lists and describes the various measurement types supported by the SAS 1000/4000.
Description of the instrument's controls, terminals, and interface elements.
Crucial safety warnings related to high voltages, lightning, and heat hazards during operation.
Guidance on navigating and using the instrument's control program for measurements.
Details on the different measuring modes: Resistivity, Self Potential, and Induced Polarization.
Information on the NiMH battery pack, its capacity, charging, and safety precautions.
Step-by-step guide for data acquisition using the Lund Imaging System.
Steps for setting up and operating the SAS LOG 300 for well logging.
List and explanation of error codes displayed by the SAS 1000/4000.
Procedures for periodic checks and tests to ensure proper functioning of the instrument.
Detailed technical specifications for the Terrameter SAS 1000/4000 transmitter and receiver.
To Next Page
