3-12 Chapter3
BE6
CPU Level 2 Cache:
This item is used to enable or to disable the CPU level 2 cache. When the external cache is
enabled, the system works faster. The default is Enable.
CPU Level 2 Cache ECC Checking:
This item is used to enable or to disable the CPU level 2 cache ECC checking function.
Quick Power On Self Test:
After the computer has been powered on, the BIOS of the motherboard will run a series of
tests in order to check the system and its peripherals. If the Quick power on self-test feature
is Enable, the BIOS will simplify the test procedures in order to speed up the boot process.
The default is Enable.
Boot Sequence:
When the computer boots up, it can load the operating system from the floppy drive A, hard
drive, SCSI drive or CD-ROM. There are many options for the boot sequence:
➤
A, C, EXT*
➤
C, A, EXT
➤
C, CD-ROM, A
➤
CD-ROM, C, A
➤
D, A, EXT (At least 2 IDE HDD can be used)
➤
E, A, EXT (At least 3 IDE HDD can be used)
➤
F, A, EXT (At least 4 IDE HDD can be used)
➤
EXT, A, C
➤
EXT, C, A
➤
LS/ZIP, C
Important Note
*
EXT:
This option lets you boot your computer from a SCSI drive or ATA/66 drive that
is connected to IDE3 or IDE4. It has to co-operate with the “Boot Sequence EXT
Means.” (refer to the following setup item)
To Next Page
Loading...
