Installing the driver for Ultra ATA/66 D-3
User’s Manual
Step 8:
Type "
A:\Win95_98
" in the “
Copy
files from:
” text box, and then click "
OK.
"
Step 9:
Select “
A:\Win95_98
”, and then
click “
OK
.”
Step 10:
Click “
No
” to continue updating
another “
PCI Mass Storage Controller
”
driver. The installation procedure is the
same as Steps 3 to 10. After updating
another controller driver, the system will ask
you to restart your computer again. Click
“
Yes
” to restart your computer.
Step 11:
After your system has restarted,
you can enter “
Control Panel
”
)
“
System
”,
and then select “
Device Manager
”
)
“
SCSI Controllers
”. If Ultra ATA/66 driver
is installed correctly, you will see the figure
on the left.
To Next Page
Loading...
