4. DRIVER REV: Note the driver version number indicated on the
DEVICE DRIVER disk as “Release *.**”.
Example:< IDE Device Driver
Drivers Diskette Release 1.09A
Release 1.09A
*5. OS/APPLICATION: Indicate what are the operating system and
the applications your are running on the system.
Example: MS-DOS 6.22, Windows 3.1....
*6. CPU: Indicate the brand and the speed (MHz) of your CPU.
Example: (A) In the “Brand” space, write “Intel”, in the
“Specifications” space, write “150MHz”。
(B) In the “Brand” space, write “Cyrix”, in the
“Specifications” space, write “P166+”。
(C) In the “Brand” space, write “AMD”, in the
“Specifications” space, write “P75”.
7. HDD: Indicate the brand and specifications of your HDD(s), specify if
the HDD is using ¨IDE1 or ¨IDE2. If you know the disk capacity,
indicate it and check (“ü”) “ ”; in case you give no indication, we will
consider that your HDD is “þIDE1” Master.
Example: In the “HDD” space, check the box, in the Brand space, write
“Seagate”, in the Specifications space, write “ST31621A
(1.6GB)”.
8. CD-ROM Drive: Indicate the brand and specifications of your
CD-ROM drive, specify if it uses ¨ IDE1 or ¨IDE2， and check
(“ü”) “ ”; in case you give no indication, we will consider that your
CD-ROM is “þIDE2” Master.
Example: In the “CD-ROM drive” space, check the box, in the Brand space,
write “Mitsumi”, in the Specifications space, write “FX-400D”.
To Next Page
Loading...
