How to fix Abit IC7-G system hang when updating BIOS?
If your Abit Motherboard system hangs when updating the BIOS, clear the CMOS jumper before booting up again. This should resolve the issue.
What to do if Abit IC7-G Motherboard system failed to boot up after overclocking?
If your Abit Motherboard system fails to boot after overclocking, try the following: 1. Switch off the power supply unit and then switch it on again after one minute. 2. If there is no power switch on the power supply unit, disconnect its power cord for one minute and then connect it back. 3. Press and hold the key on the keyboard, then press the power-on button to boot up the system. 4. Repeat the procedures for three times, or try step 2.
What to do if Abit IC7-G fails to start after installing Sound Card Driver?
If your Abit Motherboard fails to start after installing the Sound Card Driver, it might be due to the driver itself. During the 'Starting DOS…' procedure, press the SHIFT key to bypass CONFIG.SYS and AUTOEXEC.BAT. Then, edit CONFIG.SYS to disable the Sound Card Driver.
General| Form Factor | ATX |
|---|---|
| Socket Type | Socket 478 |
| Chipset | Intel 875P |
| Front Side Bus | 800 MHz |
| Memory Slots | 4 |
| Maximum RAM | 4 GB |
| RAM Type | DDR SDRAM |
| Expansion Slots | 1 x AGP 8X, 5 x PCI |
| Onboard Audio | Yes |
| Audio Channels | 6 |
| Onboard LAN | Yes |
| LAN Speed | 10/100/1000 Mbps |
| Memory Speed | 400 MHz |
| Storage Interface | IDE, SATA |
| SATA | 2 x SATA 150 |
| PATA | 2 |
| LAN Chipset | Intel 82547EI |
| Power Connector | 24-pin ATX |
| USB Ports | 8 x USB 2.0 |
Details core hardware specifications of the motherboard, including CPU, chipset, memory, and I/O.
Visual representation of motherboard components, connectors, and slots for easy identification.
Instructions for securely mounting the motherboard into the computer chassis.
Step-by-step guide for installing the processor and its cooling heatsink assembly.
Guide on how to properly install DDR DIMM modules into the motherboard slots.
Details power, fan, front panel, USB, audio, storage, and other internal connectors.
Description of all rear I/O ports for external device connections.
Configuration utility for CPU speed, multiplier, voltage, and other performance tuning.
Basic system settings including date, time, and IDE/floppy drive configurations.
Settings for managing onboard devices like IDE, SATA, USB, Audio, and LAN controllers.
Options for system power saving, wake-up features, and AC power loss behavior.
Tools for monitoring system temperatures, fan speeds, and voltage levels.
Procedures for loading default settings and exiting the BIOS configuration.
Step-by-step instructions for installing the Intel chipset drivers.
Guide to using the utility for setting up Serial ATA RAID arrays.
Step-by-step instructions for installing the onboard audio drivers.
Step-by-step instructions for installing the onboard LAN drivers.
Configuration of BIOS settings related to the Serial ATA RAID controller.
Step-by-step instructions for installing the USB 2.0 drivers.
Detailed steps for safely updating the system's BIOS.
General methods for resolving common hardware and software issues.
Procedures and guidelines for contacting technical support effectively.
Resources for finding help, including manuals, drivers, and FAQs.
Contact details for ABIT technical support offices worldwide.
To Next Page
