Ablerex ATS-16A - Installation and Operating Instructions; Packaging; Choose an Installation Location

6
3. Installation and Operating Instructions
3.1. Packaging
3.1.1. Remove the PE foam.
3.1.2. Inspect accessories
○
1
RS-232 cable x1 pcs
○
2
USB cable x1 pcs
○
3
CD (monitoring software, Setting tool ) x1 pcs
○
4
User manual
○
5
Handle and screws x1 set
○
6
Backplate and screws x1 set (only ATS Standard Series)
3.2. Choose an installation location
An appropriate installation location will optimize system performance,
reduce the chances of malfunctions, and prolong product lifespan. Please follow
the guidelines below for an appropriate location:
3.2.1. Avoid excessive high temperature or high humidity;
3.2.2. Keep away from dust, volatile gases, excessive salt content, or
corrosive gases;
3.2.3. Do not use outdoors.