23
EN
• Set Boot Priority (1st/2nd/3rd/..... Boot)
Specifes the boot sequence from the available devices. A device enclosed in
parenthesis has been disabled in the corresponding type menu.
• Hard Disk Drive / USB Hard Disk Drive
Specifes the Boot Device Priority sequence.
• Boot Configuration:
Confgure Settings during
System Boot.
Select Change User Password to give or to abandon password setting same as
Change Administrator Password item above.
Note that Administrator Password eld allows users to enter and change the
settings of the BIOS SETUP UTILITY, while User Password eld only allows users
to enter the BIOS SETUP UTILITY without having the authorization to make any
change. The Password Check item is used to specify the type of BIOS password
protection that is implemented. To clear a set Administrator Password/ User
Password, just press [Enter] under Change Administrator Password/ Change User
Password eld when you are prompted to enter the password. A message box
will pop up conrming password will be disabled. Once the password is disabled,
the system will boot and user can enter setup without entering password.
Key Management:
Enables expert user to modify Secure Boot Policy variables without full authen-
tication.
4.2.4 Boot Menu
To Next Page
