What to do if dough is difficult to remove from the ABS mixing bowl?
If dough is difficult to remove from the ABS mixing bowl, it could be over-mixed. You can also run food-grade oil between the dough and the bowl at the end of the mix cycle to prevent sticking.
Overview of the ABSFBM-120T Spiral Mixer, its features, and manual usage.
Technical specifications including dimensions, capacity, power, and speed for the mixer.
Steps for uncrating, inspecting, positioning, leveling, and connecting power for the mixer.
Procedures for checking rotation direction, emergency stop, and safety guard limit switch.
Explanation of the control panel layout, including timers, indication lights, and function keys.
Details on setting and using the three timers for slow and fast speed mixing operations.
Description of various indicator lights and their meanings for mixer status.
Explanation of the purpose and function of each key on the control panel.
Pre-operation checks including clearing the machine, work area, and checking ingredients.
Detailed steps for performing auto operation, including timer setting and starting the mixer.
Steps for operating the mixer in manual mode, including speed selection and stopping.
Explanation of manual switches for speed selection and starting/stopping the machine.
Important safety precautions to follow when using the spiral mixer.
Step-by-step guide for cleaning the spiral mixer, including brush, scraper, and water usage.
Common faults like not starting, stopping, or laboring, with possible causes and remedies.
Troubleshooting dough consistency, temperature, and removal problems with suggested solutions.
Identification of components within the control panel and main shaft assemblies.
Identification of various external mixer components and main shaft parts.
Identification of parts for the bowl cover, transmission shaft, castor, and wheel assemblies.
Identification of parts for the transmission shaft and bowl roller assemblies.
Identification of parts for the rotating plate and outrigger assemblies.
Detailed list of parts with numbers, codes, names, and specifications.
Continuation of the detailed parts list with numbers, codes, names, and specifications.
Final part of the detailed parts list with numbers, codes, names, and specifications.
Schematic diagram illustrating the electrical connections and components of the mixer.
To Next Page
General