EasyManua.ls Logo

Absaar SL30 - Safety Regulations

Absaar SL30
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UK
27
AB-SLS60
SLS60
EN60335-2-29
BATTERY Max 900Ah Min 140Ah
I
boost
60A I
min
20A
START: 320A 3S ON 120S OFF
RATED INPUT
RATED OUTPUT
VOLTAGE
230V/50Hz
INTENSITY
2.6/5.8A
FUSE
30A
VOLTAGE
12/24V
INTENSITY
30/35A
FUSE
5X80A
IP20
Disconnect the 220V power outlet before plugging in or unplugging the battery clamps.
IMPORTANT: Explosive gas, always place away from flames, sparks or incandescent bodies and
always ensure that the area is well-ventilated when charging the batteries.
Table listing the charging power depending on the position of the switches for SL60:
3. SAFETY REGULATIONS
For the safety of people and property, the following safety guidelines must be observed when using the charger.
1/ To allow for the flammable gases generated at the time of charging, the battery must be charged inside a room
with good ventilation. The product should be kept away from any flame or spark. Please DO NOT smoke when the
charger is in use.
2/ In accordance with the IP20 rating, the product must not be used outside in rain or snow.
3/ Always use grounded power of 220V.
4/ At the time of charging, chargers must always be placed on a flat and not tilted ground.
Output voltage (V)
Load current [A]
Position of the load
button
MIN + 1
12
20A
MIN + 2
12
30A
BOOST+1
12
42A
BOOST+2
12
60A
Position of the load
button
MIN + 1
24
20A
MIN + 2
24
35A
BOOST+1
24
47A
BOOST+2
24
60A

Related product manuals